Pressure sensitive gun TR.60.3

Overview

(Click here for printable details in MS Word format)


The TR 60.3 Hot-Spray-System consists of the TR 60.3 glue gun and the stand on which the gun may be deposited.


Melting and pressure-sensitive glues can be dispensed from the smallest points of approx. 0,1 g to 100 m long and 2-150 mm wide normal jetting patterns, extremely thin or millimetres thick.


The control of the compressed air and the manometer scale are integrated into the stand.


Precise adjustment of the compressed air ensures an optimum and accurate application of the glue. The adjusted air pressure can always be checked at the indication of the manometer.


The electronic temperature control is integrated in the handle for easy operation.


You adjust the optimum temperature for the selected glue from approx. 100 to 200°C. The electronic temperature control ensures an optimum operating temperature, simultaneously providing a careful handling of the material to be glued. The electronic system responds to the slightest deviation.


Spraying glues has many advantages.


The glue can be dispensed on difficult, inaccessible spots without any problem. Using pressure-sensitive glues you achieve a permanent application with unlimited open times (which so far could only be obtained by double-faced adhesive tapes).